Schiebeschalter ES｜NIDEC COMPONENTS EUROPE GmbH

Schiebeschalter ES

RoHS CoCRoHS CoC

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal Überprüfen Sie die Verteiler.: VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.

Specifications

Initial contact resistance	20 mΩ Max.（2 ~ 4 VDC 100 mA）
Dielectric strength	1500 VAC 1 minute
Insulation resistance	100 MΩ Min.（500 VDC）
Electrical life	20,000 cycles

Part number designation

ES	1	15	A	12-	Z
Series code	Number of poles 01: 1 bit 02: 2 bits	Current	Switching function 1 pole/2 poles 　A: OFF - ON 　D/N：ON - ON 　E/: ON - OFF - ON	Terminal styles None: Tab terminal＃250 10: Screw terminal 12: Solder terminal

12-

Series code

Number of poles

01: 1 bit
02: 2 bits

Current

Switching function

1 pole/2 poles

　A: OFF - ON
　D/N：ON - ON

　E/: ON - OFF - ON

Terminal styles

None: Tab terminal＃250
10: Screw terminal

12: Solder terminal

※Please refer to the model list below for the complete lineup.

List of part numbers

Part number	Rating	Switching function	Terminal styles
ES115A-Z	125 VAC 15 A 250 VAC 15 A	OFF - ON	Tab terminal＃250
ES115D-Z	125 VAC 15 A 250 VAC 15 A	ON - ON	Tab terminal＃250
ES115E-Z	125 VAC 15 A 250 VAC 7 A	ON - OFF - ON	Tab terminal＃250
ES215N-Z	125 VAC 15 A 250 VAC 15 A	ON - ON	Tab terminal＃250
ES215P-Z	125 VAC 15 A 250 VAC 7 A	ON - OFF - ON	Tab terminal＃250
ES125A10-Z	125 VAC 25 A AC250V 25A	OFF - ON	Screw terminal
ES115A12-Z	125 VAC 15 A 250 VAC 15 A	OFF - ON	Solder terminal
ES115D12-Z	125 VAC 15 A 250 VAC 15 A	ON - ON	Solder terminal
ES125A12-Z	125 VAC 25 A 250 VAC 25 A	OFF - ON	Solder terminal
ES125D12-Z	125 VAC 25 A 250 VAC 25 A	ON - ON	Solder terminal
ES225N12-Z	125 VAC 25 A 250 VAC 25 A	ON - ON	Solder terminal

Outline Dimensions

(Unit:mm)

Panel Cut-Out Dimensions

Handling Precautions

Soldering Specifications

Manual Soldering
Device: Soldering iron 350 °C Max.; 3 seconds Max.

Flux Cleaning

Solvent: Fluorine or Alcohol type.

are not process sealed. If the PC board is to be cleaned, clean the soldering surface of the substrate with a brush so that the switch is not exposed to the cleaning solution.