Schiebeschalter ASE｜NIDEC COMPONENTS EUROPE GmbH

Schiebeschalter ASE

Kontaktiere uns

RoHS CoCRoHS CoC

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal Überprüfen Sie die Verteiler.: VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.

Hyper-miniature Slide Switches

FeaturesFeatures

High Contact Reliability
Twin-contact clip mechanism for high contact reliability
Immersion washable type
Gold-plated contacts suitable for low current applications
For PC board mounting
Improved operability
The independent detent structure provides a lightoperating touch
UL-recognized File No.LR38341

Part number designation

A	SE	２	D-	２	M-	10－	Z
Series code	Type SE:Slide type	Numberof poles 1:1 pole 2:2 poles	Switching function D:ON-ON/Terminal line for double poles are 2.54mm（0.1"） N:ON-ON/Distance between two terminal rows : 5.08mm（0.2"） E:ON-OFF-ON/Terminal line for double poles are 2.54mm（0.1"）	Terminal styles 1:PC terminal 5:Right angle（0.2inch pitch） 6:Right angle（0.3inch pitch）	Actuator shape Ⅿ:Standard	Clip mechanism

２

D-

２

M-

10－

Series code

Type

SE:Slide type

Numberof poles

1:1 pole
2:2 poles

Switching function

D:ON-ON/Terminal line for double poles are 2.54mm（0.1"）
N:ON-ON/Distance between two terminal rows : 5.08mm（0.2"）

E:ON-OFF-ON/Terminal line for double poles are 2.54mm（0.1"）

Terminal styles

1:PC terminal
5:Right angle（0.2inch pitch）

6:Right angle（0.3inch pitch）

Actuator shape

Ⅿ:Standard

Clip mechanism

※Please refer to the model list below for the complete lineup.

■Actuator Shape

■Right Angle Terminals

List of part numbers

Part number	Circuit	Terminal	Switching function	Remarks	CAD
ASE1D-2M-10-Z	SPDT	PC terminal	ON-ON	Distance between two terminal rows : 2.54 mm	3D CAD（Any Model）
☆ASE1E-2M-10-Z	SPDT	PC terminal	ON-OFF-ON	Distance between two terminal rows : 2.54 mm	3D CAD（Any Model）
ASE2D-2M-10-Z	DPDT	PC terminal	ON-ON	Distance between two terminal rows : 2.54 mm	3D CAD（Any Model）
★ASE2E-2M-10-Z	DPDT	PC terminal	ON-OFF-ON	Distance between two terminal rows : 2.54 mm	3D CAD（Any Model）
☆ASE2N-2M-10-Z	DPDT	PC terminal	ON-ON	Distance between two terminal rows : 5.08 mm	3D CAD（Any Model）
ASE1D-5M-10-Z	SPDT	Right angle（0.2inch pitch）	ON-ON	Mounting height : 3.1 mm	3D CAD（Any Model）
ASE2D-5M-10-Z	DPDT	Right angle（0.2inch pitch）	ON-ON	Mounting height : 3.1 mm	3D CAD（Any Model）
ASE1D-6M-10-Z	SPDT	Right angle(0.3inch pitch）	ON-ON	Mounting height : 3.1 mm	3D CAD（Any Model）
☆ASE2D-6M-10-Z	DPDT	Right angle(0.3inch pitch）	ON-ON	Mounting height : 3.1 mm	3D CAD（Any Model）
★ASE2N-6M-10-Z	DPDT	Right angle(0.3inch pitch）	ON-ON	Mounting height : 5.15 mm	3D CAD（Any Model）

★：Made to order products.

Common specifications

Rating 0.4VA AC/DC	Voltagr range:20mV～60V Current range:1μA～50mA
Rating UL	AC/DC48V 50mA
Rating Max.	AC/DC60V 50mA
Rating Min.	AC/DC20mV 1μA
Initial contact resistance	50mΩ max.(1.5mA 200μVAC）
Dielectric strength	250VAC 1 minute
Initial insulation resistance	500MΩ min. (500VDC）
Electrical life	10,000 cycles at max. rating. 50,000 cycles at min. rating or 0.4VA
Operating force	0.69～4.9N
Operating temperature range	－20℃～＋85℃
Storage temperature range	－40℃～＋85℃

Outline Dimensions

Handling Precautions

Soldering Specifications	Manual Soldering/ Device ： Soldering iron 380℃, Max.; 3 seconds, Max. Auto Soldering： Device ： Jet wave type or dip type 275℃, Max.; 6 seconds, Max. Pre-heating should be done at temperatures ranging from 80℃ to 120℃ and within 120 sec.
Flux Cleaning	Solvent : Fluorine or Alcohol type. Cleaning after soldering should be done after the terminal temperature falls to 90℃ or below, or after leaving the switch for five minutes or longer at room temperature. Do not use ultrasonic cleaning system
Mounting of Switch	Use the PC boards of φ1 holes. Do not bend the terminals before mounting the switch on the PC board. After mounting the switch, do not place the device in such a way that the device weight will be applied on the knob, etc. of the switch. Do not apply load exceeding 12.7 N (1.3 kgf) to the knob. Use a bracket (optional accessory) if the load is expected to exceed 12.7 N (1.3 kgf). The strength of the knob will be reinforced to 29.4 N (3 kgf) max.

PC Hole Layouts

Shorting (Make-Before-Break)

A switch which momentarily connects both circuits when the actuator is moved from Point A to B in the below fi gure.
All switches which are not marked as “Shorting” are “Non-shorting” (Break-Before-Make).