NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

Liste

×

×


Produkte

Verteiler

EU-Deutsch

×

Pushbutton switch SMAP

Surface Mount Pushbutton Switches

 
FeaturesFeatures
  • Compatible with Reflow Soldering

  • Washable

  • Gold-Plated Contacts for Low Current Application

  • Clip Contact Mechanism for High Contact Reliability

Specifications

Rating Max. 0.4VA( 28VDC max.)(Resistive load)
Rating Min. 1μA 20mVDC(Resistive load)
Initial contact resistance 100mΩ max.(1.5mA 200 μVAC)
Dielectric strength 250VAC 1minute
Initial insulation resistance 500MΩ min.(250VDC)
Stroke 1.4mm
Operating force 1.47±0.98 N
Electrostatic capacity 5pF max.(AC voltage of 1M ± 200 Hz)
Electrical life 10,000 operations at max. rating 
30,000 operations at min. rating
Switch timing Non-shorting
Operating temperature range -20~+80℃
Storage temperature range -40~+80℃

Part Number Designation

SMAP1F -2M- E- Z

Series

No. of poles

1: 

1 pole

2: 

2 poles

SW function

F: 

ON-(ON)

Terminals

2: 

PC straight

5: 

R/A

Actuator shape

M: 

Standard

Packaging

Blank: 

Stick

E: 

Emboss taping

 

List of Part Numbers

 

 

 
 
Part No.No. of polesSW functionTerminalPackagingPieces in packageCAD
Part No.:SMAP1F-2M-Z 1 pole ON-(ON) PC straight Stick 50 pcs./stick
Part No.:SMAP1F-5M-Z 1 pole ON-(ON) R/A Stick 50 pcs./stick
Part No.:SMAP1F-5M-E-Z 1 pole ON-(ON) R/A Emboss taping 500 pcs./reel

Circuit Diagrams

Soldering Specifications

●In a single-pole configuration, terminals (C2), (3) and (4) are not connected.

Flux Cleaning

  • Solvent :Fluorine or Alcohol type
  • Cleaning after soldering should bedone after the terminal temperature falls to 90°C or below, or after leaving the switch for five minutes or longer at room temperature.
  • Do not use ultrasonic cleaning.

Environmental Data

●Die oben genannten Inhalte können ohne vorherige Ankündigung geändert werden.

Produkte

×

page top