Treiber TF037-1001-D
-
TF037-1001-D
-
TF037-1001-D
- ●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal Überprüfen Sie die Verteiler.- VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.
Dedicated to the Micro Blower TF037 series
- Dedicated to the Micro Blower TF037 series.
- The drivers enable users to vary the speed of the motor by adjusting the control voltage of the external input.
- Contents of the kit are Driver board and Harness (2 types).
- Wire Harness: for Driver-Blower connection for Driver-Power connection
STANDARD SPECIFICATIONS
- Unless otherwise specified, the environmental conditions are 23 °C ± 5 °C, normal humidity, and atmospheric pressure range 90 to 106 kPa
| No. | Item | Specification | |||
|---|---|---|---|---|---|
| 1 | Configuration | Drivers (Dedicated to the Micro Blower TF037 series) | |||
| 2 | Rotational Speed | 40,000 r/min（reference value） at 4.0 kPa, 100 L / min | |||
| 3 | Power Consumption | 29 W max. at 4.0 kPa, 100 L/min | |||
| 4 | Rated Voltage | 24 VDC ± 10 % | |||
| 5 | Max. Input Current | 2.0 A max. (DC) 4.0 A max. (Pulse)（Excluding inrush current） | |||
| 6 | Running Current | 1.2 A max. at 4.0 kPa, 100 L / min | |||
| 7 | Weight | 32 g max. | |||
| 8 | Operating Temperature | - 10 ~ 50 °C | |||
| 9 | Operating Humidity Range | 10 ~ 90 %RH (No condensation) | |||
| 10 | Storage Temperature | - 20 ~ 60 °C | |||
| 11 | Storage Humidity Range | 10 ~ 90 %RH (No condensation) | |||
| 12 | Resistance to Vibration | To meet the Spec after the following test | Non-operating | ||
| Kind of Vibration | Frequency change | ||||
| Frequency Range | 10 ~ 22 Hz amplitude 1mm | ||||
| 22 ~ 50 Hz, 19.6 m/s2 (2 G acceleration） | |||||
| Sweep | to-and-fro, approx. 5 min. | ||||
| Test Time | X, Y, Z directions, 60 min. each | ||||
| 13 | Resistance to Shock | To meet the Spec after the following test | Non-operating | ||
| Acceleration | 294 m / s2 (30 G) | ||||
| Pulse Width | 6 ms | ||||
| Shock Waven | Semi-sinusoidal wave | ||||
| Number of Shock | X, Y, Z, directions, once per each direction | ||||
INTERFACE
CN1(CONNECTOR FOR CONTROL)SPECIFICATIONS
PROTECTIVE FUNCTIONS
- Attached Driver Board is featured with the following protective functions.
| Protective Functions | Description |
|---|---|
| High Temperature | Power will be turned off when the thermistor inside the Blower exceeds 86 °C. |
| High rotationa | Power will be turned off when the rotational speed exceeds 45,000 r/min. |
| Overcurrent | Power will be turned off when the coil current exceeds 1.9 A (except start-up). |
| Motor Lock 1 | Power will be turned off when coil current and rotational speed are in the "Motor Lock Protection Area" shown in Graph 2 below. |
| Motor Lock 2 | Power will be turned off when the Blower does not operate even when the PRODUCT is giving command to operate. |
PROTECTIVE AREA
【Monitor / Control Flow】
- 《Restart Conditions After Blower Stop》Restart with turning the power on again.
OUTLINE DIMENSIONS
 |
|---|
- ●Die oben genannten Inhalte können ohne vorherige Ankündigung geändert werden.
Produkte
