Pressure transducer (ratio metric) P-7100｜NIDEC COMPONENTS SINGAPORE

Pressure transducer (ratio metric) P-7100

P-7100
Fitting: R1/8
P-7100
Fitting: M5 female

P-7100
Fitting: R1/8
P-7100
Fitting: M5 female

●To buy this product, please go to the following Online Web stores.

Ultra-miniature pressure sensors

Suitable for installing inside the narrow space of the equipment thanks to its small size and light weight
outline dimensions φ 17×18.7 mm, Net weight: Approx 19 g (M5 type)
High reliability (SUS316L diaphragm, oil-filled) by using double diaphragm structure
Supply voltage and analog output is 5 ± 0.5 V and the 0.5 ~ 4.5 V(ratiometric output)
High accuracy by using a digital compensation circuit employing the COB (chip on board) mounting
Variety pressure range: 0 ~ 100 kPa, - 100 ~ 100 kPa, 0 ~ 1 MPa, 0 ~ 133.3 kPa abs

Standard specifications

Media	Corrosive gases/liquids compatible with SUS316L and SUS304
Operating temp.range	-20 ~ 70 ℃
Compensated temp. range	0 ~ 50 ℃
Operating humidity range	35 ~ 85 ％RH（No condensation）
Storage temp. range	-20 ~ 80 ℃（Atmospheric pressure, humidity 65 %RH maximum）
Insulation resistance	100 MΩ minimum（500 VDC）
Dielectric strength	500 VAC 60 s（Leakage current 1 mA maximum）
Operating voltage	5 ± 0.5 VDC
Current consumption	3 mA Maximum
Sealed liquid	Silicone oil
Net weight	R1: Approx.22ｇ, M5: Approx.19ｇ

Analog output

Item / Model number	102G	103G	102R	132A
Output voltage※	0.5 ~ 4.5 V
Output limit	16.5 mV ~ 95 % Vopr
Zero voltage※	0.5 ± 0.04 V		2.5 ± 0.04 V	0.5 ± 0.1 V
Span voltage※	4.0 ± 0.04 V			4.0 ± 0.1 V
Output current	1 mA Maximum（Load resistance 5 kΩ minimum）
Linearity / Hysteresis	± 0.5 %F.S.
Thermal error (Reference temp.25°C)	Zero/Span: ± 0.05 %F.S. / °C			Zero/Span: ± 0.06 %F.S. / °C
Response time	Approx.2 ms
Gravitational （From horizontal position to vertical position）	± 0.3 %F.S.	± 0.05 %F.S.	± 0.3 %F.S.	± 0.3 %F.S.

※Output voltage is proportional to the operating voltage.(ratiometric output)
The resolving power of the analog output is 11 Bits (about 0.002V/0.05%F.S).

Environment Characteristics

Test item	Test conditions	Permissible change
Vibration	10 ~ 500 Hz, 1.5 mm maximum/98.1 m/s² 3 directions for 2 hours each	Analog output (Vzero, Vspan) ± 1 %F.S. maximum each after test
Shock	490m/s²,3 directions for 3 times each
Pressure cycling	0 ~ Rated pressure,　10⁶cycles
Moisture resistance	40℃　90 ~ 95 %RH　240 hrs.

Model number designation

P-7100 -	102	G	R1
Series name	Rated pressure range 102G: 0 ~ 100 kPa 103G: 0 ~ 1.0 MPa 102R: - 100 ~ 100 kPa 132A: 0 ~ 133.3 kPa abs	Pressure reference G: Gauge (Positive) R: Gauge (Compound) A: Absolute	Fitting R1: R1/8 M5: M5 Female

P-7100 -

102

Series name

Rated pressure range

102G: 0 ~ 100 kPa
103G: 0 ~ 1.0 MPa
102R: - 100 ~ 100 kPa
132A: 0 ~ 133.3 kPa abs

Pressure reference

G: Gauge (Positive)
R: Gauge (Compound)
A: Absolute

Fitting

R1: R1/8
M5: M5 Female

List of model numbers

Model Number	Fitting	Pressure reference	Rated pressure	Maximum pressure	Break-down pressure	CAD
P-7100-102G-R1	R1/8	Gauge	0 ~ 100 kPa	200 kPa	300 kPa	3D CAD（Any Model）
P-7100-102G-M5	M5 Female	Gauge	0 ~ 100 kPa	200 kPa	300 kPa	3D CAD（Any Model）
P-7100-102R-R1	R1/8	Gauge	- 100 ~ 100 kPa	200 kPa	300 kPa	3D CAD（Any Model）
P-7100-102R-M5	M5 Female	Gauge	- 100 ~ 100 kPa	200 kPa	300 kPa	3D CAD（Any Model）
P-7100-103G-R1	R1/8	Gauge	0 ~ 1.0 MPa	2.0 MPa	3.0 MPa	3D CAD（Any Model）
P-7100-103G-M5	M5 Female	Gauge	0 ~ 1.0 MPa	2.0 MPa	3.0 MPa	3D CAD（Any Model）
P-7100-132A-R1	R1/8	Absolute	0 ~ 133.3 kPa abs	200 kPa abs	300 kPa abs	3D CAD（Any Model）
P-7100-132A-M5	M5 Female	Absolute	0 ~ 133.3 kPa abs	200 kPa abs	300 kPa abs	3D CAD（Any Model）