NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

LIST

×

×


Products

Distributor

US-English

×

Trimmer potentiometer RJ-13

●To buy this product, please go to the following Online Web stores.
To the Trimmer potentiometer “RJ-13 series” page on the DigiKey online shop
To the Trimmer potentiometer “RJ-13 series” page on the Mouser online shop

Precious Metal Alloy Wiper

 

FeaturesFeatures
  • Wide resistance range from 10 Ω to 5 M Ω
  • Precious metal alloy wiper

Electrical Characteristics

Power ratings 0.75 W (70 °C) 0 W (120 °C)
Nominal resistance range 10 Ω ~ 5 MΩ
Resistance tolerance ± 10 %
Resistance law Linear law(B)
Maximum input voltage 300 VDC or power rating, whichever is smaller
Maximum wiper current 100 mA or power rating, whichever is smaller
Effective electrical angle 230 ° (1 turn)
End resistance 1 % or 2 Ω , whichever is greater
C.R.V. 1 % or 3 Ω , whichever is greater
Operating temp. range - 55 ~ 120 °C
Temp. coefficient 10 Ω, 20 Ω, 5 MΩ : ± 250 10-6//°C maximum
50 Ω ~ 2 MΩ : ± 100 10-6//°C maximum
Insulation resistance 1000 MΩ minimum (500 VDC)
Dielectric strength 900 VAC, 60 s
Net weight Approx. 1.90 g (RJ-13P)
Approx. 4.50 g (RJ-13B
Approx. 2.15 g (RJ-13PR)
Approx. 2.50 g (RJ-13S)
Approx. 2.78 g (RJ-13SR)

Mechanical Characteristics

Stop strength 100 mN·m {1.02 kgf·cm}
Mechanical angle 270° (1 turn)
Operating torque 3 ~ 35 mN·m {30.6 ~ 357 gf·cm}
Rotational life 200 cycles
10 Ω ~ 200 Ω [ΔR/R ≦ ± (0.5 Ω +3 %)]
500 Ω ~ 5 MΩ [ΔR/R ≦ ± (0.5 Ω +2 %)]
Terminal to strength 20 N {2.04 kgf} minimum(Tensile strength)
Thrust to rotor 10 N {1.02 kgf} minimum
Solderability 245 ± 3 °C, 2 ~ 3 s

{ }:Reference only

Environmental Characteristics

Test itemTest conditionsSpecifications
Thermal shock - 65 ~ 125 °C (0.5 h), 5 cycles [ΔR/R ≦ 1%] [S.S. ≦ 1%]
Humidity - 10 ~ 65 °C (Relative humidity 80 ~ 98%), 10 cycles, 240 h [ΔR/R ≦ 1%]
Shock 981 m/s2, 6 ms 6 directions for 3 times each [ΔR/R ≦ 1%] [S.S. ≦ 1%]
Vibration Amplitude 1.52 mm or Acceleration 196 m/s2, 10 ~ 2000 Hz, 3 directions, 12 times each [ΔR/R ≦ 1%] [S.S. ≦ 1%]
Load life 70 °C, 0.5 W, 1000 h [ΔR/R ≦ 2 %] [S.S. ≦ 1 %]
Low temp. operation - 55 °C, 2 h [ΔR/R ≦ 1 %] [S.S. ≦ 2 %]
High temp. exposure 120 °C, 250 h [ΔR/R ≦ 2 %] [S.S. ≦ 2 %]
Immersion seal 85 °C, 60 s No leaks (No continuous bubbles)
Soldering heat Flow: 260 ± 3 ° C、5 ~ 6 s, two times
Manual soldering: 380 ± 10 °C, 3 ~ 4 s
[ΔR/R ≦ 1%]

Δ R/R: Change in total resistance

S.S.: Setting stability

Maximum Input Ratings

Nominal resistance values (Ω)Resistance codeMaximum input voltage (V)Maximum wiper current (mA)
➡10 100 1.00 100
➡20 200 2.00 100
50 500 5.00 100
100 101 8.66 86.6
200 201 12.2 61.0
500 501 19.4 38.8
1 k 102 27.4 27.4
2 k 202 38.7 19.3
5 k 502 61.2 12.2
10 k 103 86.6 8.66
20 k 203 122 6.10
➡25 k 253 137 5.48
50 k 503 194 3.88
100 k 104 274 2.74
200 k 204 300 1.50
➡250 k 254 300 1.20
500 k 504 300 0.60
1 M 105 300 0.30
2 M 205 300 0.15
➡5 M 505 300 0.06
The products indicated by ➡ mark are manufactured upon receipt of order basis.

Part Number Designation

RJ-13P20 kΩ(203)
Series name


Product shape
P:Top adjustment
PR:Top adjustment with knob
B:Panel mount
SR:Side adjustment with knob
S:Side adjustment

Resistance value


Resistance code


List of Part Numbers

Nominal resistance values ➡10 Ω, ➡20 Ω,50 Ω, 100 Ω, 200 Ω, 500 Ω, 1 kΩ, 2 kΩ, 5 kΩ, 10 kΩ, 20 kΩ, ➡25 kΩ, 50 kΩ, 100 kΩ, 200 kΩ, ➡250 kΩ,500 kΩ, 1 MΩ, 2 MΩ, ➡5 MΩ
  • The above part numbers are all available with the respective combination of <Nominal resistance values> 
  • Verify the above part numbers when placing orders.
  • The products indicated by ➡ mark are manufactured upon receipt of order basis.
PART NUMBERAdjustment positionForm of packagingPieces in packageCAD
RJ-13P Top adjustment Plastic bag 50 pcs./pack
RJ-13B Panel mount Plastic bag 25 pcs./pack
RJ-13PR Top adjustment with knob Plastic bag 25 pcs./pack
RJ-13S Side adjustment Plastic bag 25 pcs./pack
RJ-13SR Side adjustment with knob Plastic bag 25 pcs./pack

Outline Dimensions

Unless otherwise specified, tolerance: ± 0.3 (Unit: mm)

Packaging Specifications

〈Bulk pack specifications〉

Unit of bulk pack in a plastic bag is 25 pcs. per pack, only that RJ-13P is 50 pcs. per pack.
Boxing of bulk in a plastic bag is performed with 50 pcs. per box, only that RJ-13P is 100 pcs. per box.

Environmental files

●The above contents and descriptions are subject to change without notice. 

Products

×

page top