Druckmessgerät PG-75｜NIDEC COMPONENTS EUROPE GmbH

Druckmessgerät PG-75

PG-75

PG-75

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal Überprüfen Sie die Verteiler.: VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.

Pressure gauge PG-75

Compact, lightweight and multi-functional generalpurpose pressure gauge.
It is adopted welding integral structure with SUS304/316L at pressure receiving section.
A pressure display function is substantial. (3 1/2 digit, 7 segment LED, 2-color LED red / green change, Nondisplay mode)
Two types of analog output , one is voltage output（1-5V),The other is current output（ 4-20mA）.
The gage pressure is (0 ~ positive pressure), compound pressure range (negative pressure ～ positive pressure),to support maximum of 3.5 MPa.
Comply with IP65, CE Marking and UL certification obtained.

General specifications

Model number		102G	103G	353G	102R	103R	353R
Pressure reference		Gauge			Gauge (Compound)
Rated pressure	Pr(L) ～ Pr(H)	0 ~ 100 kPa	0 ~ 1.0 MPa	0 ~ 3.5 MPa	- 100 ~ 100 kPa	- 0.1 ~ 1.0 MPa	- 0.1 ~ 3.5 MPa
Maximum pressure	Pmax	200 kPa	2 MPa	5 MPa	200 kPa	2 MPa	5 MPa
Break-down pressure	Pb	300 kPa	3 MPa	7 MPa	300 kPa	3 MPa	7 MPa
Full-scale	FS	100 KPa	1 MPa	3.5 MPa	200 kPa	1.1 MPa	3.6 MPa
Pressure Medium		Corrosive gases / Liquids compatible with SUS304 and SUS316L
Sealed liquid		Silicone oil
Operating voltage	Vopr	10.8 ~ 30 VDC(Including ripple percentage)
Consumption current		50 mA maximum (Not included current analog output)
Protection grade		IP65 of IEC
Operating temp.		- 10 ~ 50 ℃ (Storage Temperature: - 20 ~ 70 ℃ )
Operating humidity		35 ~ 85 ％RH
Insulation resistance		100 MΩ minimum at 500 VDC between bundled leads and pressure port
Dielectric strength		One minuts at 500 VAC between bundled leads and pressure port (1 mA maximum leakage)
Type of mounting		Stem mount, Back mount
Pressure Port		R1（R1/8）、R2（R1/4）
Fitting materials		Diaphragm: SUS316L、Fitting: SUS304
Net Weight		Approx. 115 ± 15 g (incl. 2 m cable)

Switch output

Number of outputs	Two outputs (NPN/PNP)
Switching capacity	30 VDC / 100 mA maximum
Residual voltage	1.2 V maximum (NPN) / 2.2 V maximum (PNP), Load current 100 mA
Hysteresis	0 ~ Approx 0.3 Pr (H), (Adjustable)
Repeatability	± 0.3 ％ FS / Reference temp. 25 ℃
Accuracy	± 2% FS (Integrated accuracy: Including errors of setting, linearity, hystresis and thermal error.)
Response	Approx 5 ms (Digital filter settings :”F0”)
Protection	Exists / Short circuit protection (Switch Overload current detection: Approx 150 mA minimum)
State indication	SW monitor LED (2 points) , Lighted when the switch output is ON. (Pressure display inverted colors)

Analog output

Voltage output	Vo	1 ~ 5 V / Pr(L) ~ Pr(H) , F.S.: 4 V
	Accuracy	± 2 %F.S. (Integrated accuracy) / Measurement load resistance(1 MΩ maximum)
	Resolution	Approx. 2.7 mV（Approx 0.068 ％F.S.）（11 bit DAC）
	Output resistance	Approx. 1 kΩ (Internal impedance)
	Response	Approx. 2 ms maximum
Current output	Io	4 ~ 20 mA / Pr(L) ~ Pr(H), F.S.: 16 mA
	Accuracy	± 2 %F.S. (Integrated accuracy) / Measurement load resistance (250 Ω maximum)
	Resolution	Approx. 0.011 mA（Approx 0.068 ％F.S.）（11 bit DAC）
	Output resistance	Vopr ≦ 18 VDC: 50 ~ 300 Ω, Vopr ＞ 18 VDC: 50 ~ 500 Ω
	Response	Approx. 2 ms maximum

Pressure display

Display element	3 1/2 digits, 7 segment LED (Red/Green) Reverse display selectable in tandem with SW1.
Display cycle	5 times / sec（moving average）
Accuracy	± 2 ％ F.S.(Integrated accuracy)

ENVIRONMENTAL CHARACTERISTICS

Test item	Test conditions（At 25 ± 5 °C)	Permissible change
Vibration	10 ~ 500 Hz 1.5 mm maximum / 98.1 m/s², three directions, two hours each	Pressure indication, switch operating pressure and analog output (zero and span) : ± 2 %F.S. maximum during test
Shock	490 m/s² , 3 directions for 3 times each
Moisture resistance	40 °C, 90 ~ 95 %RH, 240 hrs
Pressure cycling	0 ~ Rated pressure, 106 cycles

MODEL NUMBER DESIGNATION

PG-75 -	102R-	N	V	R2	B
Series name	Rated pressure 102G: 0 ~ 100 kPa 102R: - 100 ~ 100 kPa 103G: 0 ~ 1.0 MPa 103R: - 0.1 ~ 1.0 MPa 353G: 0 ~ 3.5 MPa 353R: - 0.1 ~ 3.5 MPa	Switch output interface　 N: NPN open collector P: PNP open collector	Analog output Ｖ: Voltage output (1–5 Ｖ) Ａ: Current output (4–20mA)	Fitting(With M5 female screw) R1: R 1/8 R2: R 1/4	Pressure port Blank: Stem mount B: Back mount

PG-75 -

102R-

N

V

R2

B

Series name

Rated pressure

102G: 0 ~ 100 kPa

102R: - 100 ~ 100 kPa

103G: 0 ~ 1.0 MPa

103R: - 0.1 ~ 1.0 MPa

353G: 0 ~ 3.5 MPa

353R: - 0.1 ~ 3.5 MPa

Switch output interface　

N: NPN open collector

P: PNP open collector

Analog output

Ｖ: Voltage output (1–5 Ｖ)

Ａ: Current output (4–20mA)

Fitting(With M5 female screw)

R1: R 1/8

R2: R 1/4

Pressure port

Blank: Stem mount

B: Back mount

LIST OF MODEL NUMBERS

Model number	Rated pressure	Type of mounting	Pressure Port	SW output	Analog output	CAD
⇒ PG-75-102G-NVR1	0 ~ 100 kPa	Stem mount	R1/8	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-102G-NAR1	0 ~ 100 kPa	Stem mount	R1/8	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-102G-PVR1	0 ~ 100 kPa	Stem mount	R1/8	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-102G-PAR1	0 ~ 100 kPa	Stem mount	R1/8	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-102G-NVR2	0 ~ 100 kPa	Stem mount	R1/4	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-102G-NAR2	0 ~ 100 kPa	Stem mount	R1/4	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-102G-PVR2	0 ~ 100 kPa	Stem mount	R1/4	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-102G-PAR2	0 ~ 100 kPa	Stem mount	R1/4	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-102G-NVR1B	0 ~ 100 kPa	Back mount	R1/8	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-102G-NAR1B	0 ~ 100 kPa	Back mount	R1/8	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-102G-PVR1B	0 ~ 100 kPa	Back mount	R1/8	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-102G-PAR1B	0 ~ 100 kPa	Back mount	R1/8	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-102G-NVR2B	0 ~ 100 kPa	Back mount	R1/4	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-102G-NAR2B	0 ~ 100 kPa	Back mount	R1/4	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-102G-PVR2B	0 ~ 100 kPa	Back mount	R1/4	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-102G-PAR2B	0 ~ 100 kPa	Back mount	R1/4	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-102R-NVR1	- 100 ~ 100 kPa	Stem mount	R1/8	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-102R-NAR1	- 100 ~ 100 kPa	Stem mount	R1/8	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-102R-PVR1	- 100 ~ 100 kPa	Stem mount	R1/8	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-102R-PAR1	- 100 ~ 100 kPa	Stem mount	R1/8	PNP	4 ~ 20 mA	3D CAD（Any Model）
PG-75-102R-NVR2	- 100 ~ 100 kPa	Stem mount	R1/4	NPN	1 ~ 5 V	3D CAD（Any Model）
PG-75-102R-NAR2	- 100 ~ 100 kPa	Stem mount	R1/4	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-102R-PVR2	- 100 ~ 100 kPa	Stem mount	R1/4	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-102R-PAR2	- 100 ~ 100 kPa	Stem mount	R1/4	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-102R-NVR1B	-100 ~ 100 kPa	Back mount	R1/8	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-102R-NAR1B	- 100 ~ 100 kPa	Back mount	R1/8	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-102R-PVR1B	- 100 ~ 100 kPa	Back mount	R1/8	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-102R-PAR1B	- 100 ~ 100 kPa	Back mount	R1/8	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-102R-NVR2B	- 100 ~ 100 kPa	Back mount	R1/4	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-102R-NAR2B	- 100 ~ 100 kPa	Back mount	R1/4	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-102R-PVR2B	- 100 ~ 100 kPa	Back mount	R1/4	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-102R-PAR2B	- 100 ~ 100 kPa	Back mount	R1/4	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-103G-NVR1	0 ~ 1.0 MPa	Stem mount	R1/8	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-103G-NAR1	0 ~ 1.0 MPa	Stem mount	R1/8	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-103G-PVR1	0 ~ 1.0 MPa	Stem mount	R1/8	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-103G-PAR1	0 ~ 1.0 MPa	Stem mount	R1/8	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-103G-NVR2	0 ~ 1.0 MPa	Stem mount	R1/4	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-103G-NAR2	0 ~ 1.0 MPa	Stem mount	R1/4	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-103G-PVR2	0 ~ 1.0 MPa	Stem mount	R1/4	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-103G-PAR2	0 ~ 1.0 MPa	Stem mount	R1/4	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-103G-NVR1B	0 ~ 1.0 MPa	Back mount	R1/8	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-103G-NAR1B	0 ~ 1.0 MPa	Back mount	R1/8	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-103G-PVR1B	0 ~ 1.0 MPa	Back mount	R1/8	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-103G-PAR1B	0 ~ 1.0 MPa	Back mount	R1/8	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-103G-NVR2B	0 ~ 1.0 MPa	Back mount	R1/4	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-103G-NAR2B	0 ~ 1.0 MPa	Back mount	R1/4	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-103G-PVR2B	0 ~ 1.0 MPa	Back mount	R1/4	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-103G-PAR2B	0 ~ 1.0 MPa	Back mount	R1/4	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-103R-NVR1	- 0.1 ~ 1.0 MPa	Stem mount	R1/8	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-103R-NAR1	- 0.1 ~ 1.0 MPa	Stem mount	R1/8	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-103R-PVR1	- 0.1 ~ 1.0 MPa	Stem mount	R1/8	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-103R-PAR1	- 0.1 ~ 1.0 MPa	Stem mount	R1/8	PNP	4 ~ 20 mA	3D CAD（Any Model）
PG-75-103R-NVR2	- 0.1 ~ 1.0 MPa	Stem mount	R1/4	NPN	1 ~ 5 V	3D CAD（Any Model）
PG-75-103R-NAR2	- 0.1 ~ 1.0 MPa	Stem mount	R1/4	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-103R-PVR2	- 0.1 ~ 1.0 MPa	Stem mount	R1/4	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-103R-PAR2	- 0.1 ~ 1.0 MPa	Stem mount	R1/4	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-103R-NVR1B	- 0.1 ~ 1.0 MPa	Back mount	R1/8	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-103R-NAR1B	- 0.1 ~ 1.0 MPa	Back mount	R1/8	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-103R-PVR1B	- 0.1 ~ 1.0 MPa	Back mount	R1/8	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-103R-PAR1B	- 0.1 ~ 1.0 MPa	Back mount	R1/8	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-103R-NVR2B	- 0.1 ~ 1.0 MPa	Back mount	R1/4	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-103R-NAR2B	- 0.1 ~ 1.0 MPa	Back mount	R1/4	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-103R-PVR2B	- 0.1 ~ 1.0 MPa	Back mount	R1/4	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-103R-PAR2B	- 0.1 ~ 1.0 MPa	Back mount	R1/4	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-353G-NVR1	0 ~ 3.5 MPa	Stem mount	R1/8	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-353G-NAR1	0 ~ 3.5 MPa	Stem mount	R1/8	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-353G-PVR1	0 ~ 3.5 MPa	Stem mount	R1/8	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-353G-PAR1	0 ~ 3.5 MPa	Stem mount	R1/8	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-353G-NVR2	0 ~ 3.5 MPa	Stem mount	R1/4	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-353G-NAR2	0 ~ 3.5 MPa	Stem mount	R1/4	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-353G-PVR2	0 ~ 3.5 MPa	Stem mount	R1/4	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-353G-PAR2	0 ~ 3.5 MPa	Stem mount	R1/4	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-353G-NVR1B	0 ~ 3.5 MPa	Back mount	R1/8	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-353G-NAR1B	0 ~ 3.5 MPa	Back mount	R1/8	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-353G-PVR1B	0 ~ 3.5 MPa	Back mount	R1/8	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-353G-PAR1B	0 ~ 3.5 MPa	Back mount	R1/8	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-353G-NVR2B	0 ~ 3.5 MPa	Back mount	R1/4	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-353G-NAR2B	0 ~ 3.5 MPa	Back mount	R1/4	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-353G-PVR2B	0 ~ 3.5 MPa	Back mount	R1/4	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-353G-PAR2B	0 ~ 3.5 MPa	Back mount	R1/4	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-353R-NVR1	- 0.1 ~ 3.5 MPa	Stem mount	R1/8	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-353R-NAR1	- 0.1 ~ 3.5 MPa	Stem mount	R1/8	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-353R-PVR1	- 0.1 ~ 3.5 MPa	Stem mount	R1/8	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-353R-PAR1	- 0.1 ~ 3.5 MPa	Stem mount	R1/8	PNP	4 ~ 20 mA	3D CAD（Any Model）
PG-75-353R-NVR2	- 0.1 ~ 3.5 MPa	Stem mount	R1/4	NPN	1 ~ 5 V	3D CAD（Any Model）
PG-75-353R-NAR2	- 0.1 ~ 3.5 MPa	Stem mount	R1/4	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-353R-PVR2	- 0.1 ~ 3.5 MPa	Stem mount	R1/4	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-353R-PAR2	- 0.1 ~ 3.5 MPa	Stem mount	R1/4	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-353R-NVR1B	- 0.1 ~ 3.5 MPa	Back mount	R1/8	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-353R-NAR1B	- 0.1 ~ 3.5 MPa	Back mount	R1/8	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-353R-PVR1B	- 0.1 ~ 3.5 MPa	Back mount	R1/8	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-353R-PAR1B	- 0.1 ~ 3.5 MPa	Back mount	R1/8	PNP	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-353R-NVR2B	- 0.1 ~ 3.5 MPa	Back mount	R1/4	NPN	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-353R-NAR2B	- 0.1 ~ 3.5 MPa	Back mount	R1/4	NPN	4 ~ 20 mA	3D CAD（Any Model）
⇒ PG-75-353R-PVR2B	- 0.1 ~ 3.5 MPa	Back mount	R1/4	PNP	1 ~ 5 V	3D CAD（Any Model）
⇒ PG-75-353R-PAR2B	- 0.1 ~ 3.5 MPa	Back mount	R1/4	PNP	4 ~ 20 mA	3D CAD（Any Model）

The products marked ⇒ are manufactured upon receipt of order basis.

MULTIPLIER FACTOR

The multiplier factor is selectable by changing the value of third digit on the display during the operation setting.

The settings indicated by "-" on the table above are not selectable because of resolution.
Either "1"(for 102A, 102V, 102G, and 102R) or "8" (for 103G, 103R, 353G and 353R) are set prior to delivery.
Changes of the multiplier factor apply to display values. Also, note the changes reset switch setting value and hysteresis.

SWITCH OUTPUT MODE

SW output is selectable by changing the value of first digit on the display

In the Separate mode, SW 1 corresponds to Setting 1 and SW2 corresponds to Setting 2.
In the Window Comparator Mode, SW 1 corresponds to the Setting 1 (lower limit) and Setting 3 (upper limit). Also. SW2 corresonds to the setting 2 (lower limit) and setting 4 (upper limit).
The Hysteresis （H） setting is common to SW 1 and SW 2 operations.
When SW operation is changed between the Separate Mode and Window Comparator Mode, SW pressure settings that are set separately will be reset.

INTERNAL ELECTRICAL SCHEMATICS

EXTERNALS SPECIFICATION

MEANS OF ATTACHMENT (Option)

Others

Tube at air intake
If there is a possiblity that liquids such as water, oil etc splash to the main body and it may flow into the inside of the product through the air intake, connect a silicon tube to the air intake and position the other end of the tube in a suitable safe place. At that time, do not bend the tube or block the other end of the tube.
Piping
Use a wrench on the hexagon of the fitting. Do not hold the main body when tightening.

ACCESSORIES (Sold separately)

Name	Series name	Contents	Applicable model
Panel holder set	ACPG-003	Panel holder cover Panel holder Panel stopper (2 pcs.)	PG-30 · PG-35 · PG-75 · PG-35H · PG-35L
Holder cover set (For protecting gauge operating panel)	ACPG-004	Panel holder cover Panel holder	PG-30 · PG-35 · PG-75 · PG-35H · PG-35L
Holder stopper set	ACPG-007	Panel holder Panel stopper (2 pcs.)	PG-30 · PG-35 · PG-75 · PG-35H · PG-35L

HOW TO MOUNT OPTIONAL ACCESSORIES (Sold separately)

◆PG-30 • PG-35 • PG-35H • PG-35L • PG-75 Panel cut holder set & holder cover set

◆Panel holder cover set

Unterlagen

Kontaktiere uns