NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

LIST

×

×


Products

Distributor

Global-En

×

Rotary coded switch SA-7000

Economy type that contributes to cost performance

 

FeaturesFeatures
  • Low profile of 3.0 mm
  • Wide variety (top or side setting, 10 or 16 positions,
    J-hook, gull wing or through hole pins) to choose from
  • Easy to recognize
  • Low-profile side setting type with support terminals is available
  • Resin material is UL Recognized 94V-0
  • In this series, material data sheets ideal for REACH-SVHC
    surveys etc. can be downloaded in chemSHERPA-AI format.
  • Download chemSHERPA-AI from the list of P/N below

Standard Specifications

Circuit type BCD (Real code, Complementary code)
BCH (Real code, Complementary code)
Operating temperature range -40 ~ 85 °C
Storage temperature range -40 ~ 85 °C
Sealing Non-Washable
Net weight Approx. 0.32 g (Top setting type without knob)
Approx. 0.34 g (Top setting type with knob)
Approx. 0.69 g (Side setting type without knob)
Approx. 0.71 g (Side setting type with knob)
Approx. 0.42 g (Low-profile side setting type without knob)
Approx. 0.44 g (Low-profile side setting type with knob)

Electrical Characteristics

Contact rating Non-switching: 100 mA 50 VDC
Switching: 100 mA 5 VDC
Minimum: 1 μA 20 mVDC
Contact resistance 100 mΩ max.
Insulation resistance 100 MΩ (100 VDC) min.
Dielectric strength 250 VAC, 60 s

Mechanical Characteristics

No. of positions 10 positions (Real code, Complementary code)
16 positions (Real code, Complementary code)
Adjustment torque 20 mN·m {204 gf·cm} max.
Stepping angle 36° (10 positions), 22.5° (16 positions)
Solderability 245 ± 3 °C, 2 ~ 3 s
Soldering heat

Reflow:255 °C (Peak temperature)
(Please refer to the profile below)
Flow:260 ± 3 °C, 5~ 6 s, two
Manual soldering:350 ± 10 °C, 3 ~ 4 s

Shear (adhesion) 5 N {0.51 kgf} 10 s
Substrate bending Width 90 mm, bend 3 mm, 5 s, 1 time
Pull-off strength 5 N {0.51 kgf} 10s
Stop strength (With knob only) 5 N {0.51 kgf} 10s

{ }: Reference only

Environmental Characteristics

Vibration Amplitude 1.5 mm or Acceleration 98 m/s2, 10-500-10 Hz, 3 directions for 2 h each
Shock 490 m/s2, 11 ms 6 directions for 3 times each
Load life 10000 steps minimum, 100 mA 5 VDC
Humidity (Steady state) 40 °C, Relative humidity 90 ~ 95 %, 240 h
High temperature exposure 85 °C, 96 h
Low temperature exposure -40 °C, 96 h
Thermal shock -40 °C (0.5 h) ~ 85 °C (0.5 h), 5 cycles

Part number designation

SA-7010TA

Series name

Shape of rotor

0: Flush recessed for Flat slot (Without knob)
1: With knob
2: Flush recessed for Phillips slot (Without knob)

Circuit (Code)

1: 10 positions, real code
3: 10 positions, complementary code
5: 16 positions, real code
7: 16 positions, complementary code

Setting position

0: Top setting
1: Side setting
2: Low-profile side setting & forward support terminal type
3: Low-profile side setting & sideling support terminal type

Form of packaging

T: Taping (Reel)
Blank: Bulk in plastic bag
(Only taping availabe for Low-profile side setting type)

Shape of terminal

A: J-hook
B: Gull wing
C: Through hole pins
(Only gull wing availabe for Low-profile side setting type)

List of part numbers

 
 

 

 
 
CAD and chemSHERPA-AI (a material data sheet ideal for REACH surveys, etc. / version: 2.11.00 or 2.10.00 available) can be downloaded from the button for each P/N in the table below. *Need to log in to download.
Part No.Setting
position
Shape of
terminal
Circuit (Code)Packaging specMaterial dataCAD
S-7060ETA Top J-hook 6 positions,
Real
Taping,
500 pcs./reel
S-7060EA Top J-hook 6 positions,
Real
Plastic bag,
50 pcs./pack
S-7060ETB Top Gull wing 6 positions,
Real
Taping,
500 pcs./reel
S-7060EB Top Gull wing 6 positions,
Real
Plastic bag,
50 pcs./pack
S-7010ETA Top J-hook 10 positions,
Real
Taping,
500 pcs./reel
S-7010EA Top J-hook 10 positions,
Real
Plastic bag,
50 pcs./pack
S-7010ETB Top Gull wing 10 positions,
Real
Taping,
500 pcs./reel
S-7010EB Top Gull wing 10 positions,
Real
Plastic bag,
50 pcs./pack
S-7010EWC Top Through hole 10 positions,
Real
Tray,
50 pcs./tray
S-7010EC Top Through hole 10 positions,
Real
Plastic bag,
50 pcs./pack
S-7011ETA Side J-hook 10 positions,
Real
Taping,
500 pcs./reel
S-7011EA Side J-hook 10 positions,
Real
Plastic bag,
50 pcs./pack
S-7011ETB Side Gull wing 10 positions,
Real
Taping,
500 pcs./reel
S-7011EB Side Gull wing 10 positions,
Real
Plastic bag,
50 pcs./pack
S-7011EWC Side Through hole 10 positions,
Real
Tray,
50 pcs./tray
S-7011EC Side Through hole 10 positions,
Real
Plastic bag,
50 pcs./pack
S-7030ETA Top J-hook 10 positions,
Complementary
Taping,
500 pcs./reel
S-7030EA Top J-hook 10 positions,
Complementary
Plastic bag,
50 pcs./pack
S-7030ETB Top Gull wing 10 positions,
Complementary
Taping,
500 pcs./reel
S-7030EB Top Gull wing 10 positions,
Complementary
Plastic bag,
50 pcs./pack
S-7030EWC Top Through hole 10 positions,
Complementary
Tray,
50 pcs./tray
S-7030EC Top Through hole 10 positions,
Complementary
Plastic bag,
50 pcs./pack
S-7031ETA Side J-hook 10 positions,
Complementary
Taping,
500 pcs./reel
S-7031EA Side J-hook 10 positions,
Complementary
Plastic bag,
50 pcs./pack
S-7031ETB Side Gull wing 10 positions,
Complementary
Taping,
500 pcs./reel
S-7031EB Side Gull wing 10 positions,
Complementary
Plastic bag,
50 pcs./pack
S-7031EWC Side Through hole 10 positions,
Complementary
Tray,
50 pcs./tray
S-7031EC Side Through hole 10 positions,
Complementary
Plastic bag,
50 pcs./pack
S-7050ETA Top J-hook 16 positions,
Real
Taping,
500 pcs./reel
S-7050EA Top J-hook 16 positions,
Real
Plastic bag,
50 pcs./pack
S-7050ETB Top Gull wing 16 positions,
Real
Taping,
500 pcs./reel
S-7050EB Top Gull wing 16 positions,
Real
Plastic bag,
50 pcs./pack
S-7050EWC Top Through hole 16 positions,
Real
Tray,
50 pcs./tray
S-7050EC Top Through hole 16 positions,
Real
Plastic bag,
50 pcs./pack
S-7051ETA Side J-hook 16 positions,
Real
Taping,
500 pcs./reel
S-7051EA Side J-hook 16 positions,
Real
Plastic bag,
50 pcs./pack
S-7051ETB Side Gull wing 16 positions,
Real
Taping,
500 pcs./reel
S-7051EB Side Gull wing 16 positions,
Real
Plastic bag,
50 pcs./pack
S-7051EWC Side Through hole 16 positions,
Real
Tray,
50 pcs./tray
S-7051EC Side Through hole 16 positions,
Real
Plastic bag,
50 pcs./pack
S-7070ETA Top J-hook 16 positions,
Complementary
Taping,
500 pcs./reel
S-7070EA Top J-hook 16 positions,
Complementary
Plastic bag,
50 pcs./pack
S-7070ETB Top Gull wing 16 positions,
Complementary
Taping,
500 pcs./reel
S-7070EB Top Gull wing 16 positions,
Complementary
Plastic bag,
50 pcs./pack
S-7070EWC Top Through hole 16 positions,
Complementary
Tray,
50 pcs./tray
S-7070EC Top Through hole 16 positions,
Complementary
Plastic bag,
50 pcs./pack
S-7071ETA Side J-hook 16 positions,
Complementary
Taping,
500 pcs./reel
S-7071EA Side J-hook 16 positions,
Complementary
Plastic bag,
50 pcs./pack
S-7071ETB Side Gull wing 16 positions,
Complementary
Taping,
500 pcs./reel
S-7071EB Side Gull wing 16 positions,
Complementary
Plastic bag,
50 pcs./pack
S-7071EWC Side Through hole 16 positions,
Complementary
Tray,
50 pcs./tray
S-7071EC Side Through hole 16 positions,
Complementary
Plastic bag,
50 pcs./pack
  • ★: Made to order products
  • Taping and tray version can be supplied only in reel or tray unit.

Code Format

No. of positions

16 positions
10 positions
Position 1 2 4 5 6 7 8 9
Code





Real code



8                
4            
2            
1          
Complementary code

8

   
4        
       
1          

No. of positions

16 positions
 
Position A B C D E F
Code





Real code



8
4    
2    
1      
Complementary code

8            
4        
2        
1      

Outline Dimensions

(Unit:mm)

Recommended P.C.B. Pad Outline Dimensions

Size of P.C.B. Processing

(Unit:mm)

 

Packaging Specifications

〈Taping packaging specifications〉

Taping version is packaged in 500 pcs. per reel. Orders will be accepted for units of 500 pcs., i.e., 500, 1000, 1500, pcs., etc.
Taping version is boxed with one reel (500 pcs.).
Maximum number of consecutive missing pieces=2 Leader length and reel dimension are shown in the diagrams below:

(Unit:mm)


(Conforms to JIS C 0806-3)

  • ● Embossed tape dimensions
     
  • ● Reel dimensions 
Part numberABCD
SA-70□0・SA-72□0TA / TB φ 254 ± 2 17.4 ± 1 21.4 ± 1 φ 50 min.
SA-710TA / TB φ 330 ± 2 17.4 ± 1 21.4 ± 1
φ 80 ± 1
SA-701・SA-72□1TA / TB φ 330 ± 2 17.4 ± 1 21.4 ± 1
SA-71□1TA / TB φ 330 ± 2 17.4 ± 1 21.4 ± 1
SA-72・SA-7□□3TB φ 330 ± 2 25.4 ± 1 29.4 ± 1


(Conforms to JIS C 0806-3)


  • ●SA-70□0T□ ●SA-72□0T□
    <Top setting without knob>
  • ●SA-71□0T□
    <Top setting with knob>


(Conforms to JIS C 0806-3)

  • ●SA-70□1T□ ●SA-72□1T□
    <Side setting without knob>

  • ●SA-71□1T□
    <Side setting with knob>


(Conforms to JIS C 0806-3)

  • ●SA-7□□2TB ●SA-7□□3TB
    <Low-profile side setting> 

〈Bulk pack specifications〉

The smallest unit of bulk pack in a plastic bag is 10 pcs. per pack. Orders will be accepted for unit of minimum 10 pcs., i.e., 10, 20, 30 pcs., etc.
Boxing of bulk pack in a plastic bag is performed with 50 pcs. (Top setting type is 200 pcs., side setting type is 100 pcs.) per box.
●The above contents and descriptions are subject to change without notice. 

Products

×

page top