Detect switch CL-DA
- ●To make a purchase, contact Distributors, or use e-commerce below.
SALES CHANNEL ;Check our Distributors.- SALES CHANNELClick here to check our Distributors.
With the same shape for A-TCA standard switch
- High reliability by Gold contact
- RoHS compliant
- For detection of operation from side direction
- Automatic mounting possible
- Low profile design of 2mm
Standard Specifications
| Operating temp. range | －40 ~ 85 °C |
|---|---|
| Storage temp. range | －40 ~ 85 °C |
| Sealing | Non-washable |
| Net weight | 0.093 g |
Electrical characteristics
| Contact rating | Switching DC12 V, 100 mA Minimum DC20 mV, 1 μA |
|---|---|
| Contact resistance | 100 mΩ maximum |
| Insulation resistance | 100 MΩ (DC100 V) minimum |
| Dielectric strength | AC250 V, 60s |
Mechanical characteristics
| Switching function | OFF － (ON) / ON － (OFF) |
|---|---|
| Stroke | Pre-travel: 0.35mm Over-travel: 2.0mm Total: 2.35mm |
| Operating force | 0.75N {0.075 kgf} |
| Stop strength | 5N {0.51 kgf}, 60s |
| Solderability | 245 ± 3 °C, 2~3s |
| Soldering heat | Reflow：260 °C (Peak temperature) （Please refer to the profile below） |
| Shear (Adhesion) | 5N {0.51 kgf} 10s |
| Substrate bending | Width 90 mm, bend 3mm, 5s, 1 time |
| Pull-off strength | 5N {0.51 kgf} 10s |
{ } : Reference only
■＜Reflow profile for soldering heat evaluation＞
Environmental characteristics
| Vibration | Amplitude 1.5 mm（Total amplitude）or Acceleration 98 m/s2, 10-500 Hz, 3 directions for 10 cycles each |
|---|---|
| Shock | 490 m/s2, 11 ms 6 directions for 3 times each |
| Load life | Continuous load 50,000cycles DC12 V, 100 mA |
| Humidity | −10 ~ 65 °C, Relative humidity 0 ~ 96 %, 24 h for 10 cycles |
| High temp. exposure | 85 °C, 96 h No load |
| Low temp. exposure | −40 °C, 96 h No load |
| Thermal shock | −40 (0.5 h) ~ 85 °C (0.5 h), 5 cycles |
Part number designation
| CL-DA- | 1 | C | B4- | A | 2 | T |
|---|---|---|---|---|---|---|
|
Series name |
No. of bits 01: 1 bit |
Switching function B:ON (OFF) C:OFF (ON) |
Shape of terminal B4: Gull wing |
Shape of actuator A：Standard |
Contact material 2：Gold |
Form of packaging T ：Taping (Reel) |
List of part numbers
| Part numbers | No. of bits | Switching function | Shape of terminal | Shape of actuator | Contact material | Form of packaging | CAD |
|---|---|---|---|---|---|---|---|
| CL-DA-1BB4-A2T | 1 bit | ON − (OFF) | Gull wing | Standard | Gold | Taping (Reel) | |
| CL-DA-1CB4-A2T | 1 bit | OFF − (ON) | Gull wing | Standard | Gold | Taping (Reel) |
Outline dimensions
Unless otherwise specified, tolerance : ± 0.3 (Unit : mm)
Recommended PCB Pad Dimension
(Unit : mm)
Switch functions
Packaging specifications
〈Taping packaging specifications〉
Taping version is packaged in 1000 pcs. per reel. Orders will be accepted for units of 1000 pcs.
Maximum number of consecutive missing pieces=2.
Leader length and reel dimension are shown in the diagrams below:
(Unit:mm)
-
● Embossed tape dimensions
-
● Reel dimensions
(Conforms to JIS C 0806-3 , In accordance with EIAJ ET-7200A)
-
● 1bit
Documents
Environmental files
- ●The above contents and descriptions are subject to change without notice.
Products
