NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

LIST

×

×


Products

Distributor

EU-English

×

Pressure transducer with amp. PA-848

 
●To buy this product, please go to the following Online Web stores.
To the Pressure transducer with amp.“PA-848 series” page on the DigiKey online shop
To the Pressure transducer with amp.“PA-848 series” page on the Mouser online shop

Strong structure with IP67 degree of protection

  • Pressure sensors with IP67 degree of protection for outside-house applicants.
  • Operation temperature up to 100 °C~ for pressure diaphragm.
  • Voltage Output of 1 ~ 5 V DC with built-in amplifier (PA- 840), Current output of 4 ~ 20 mA DC (PA-848).
  • High reliability (SUS 316 L diaphragm, oil-filled) by using double diaphragm structure.
  • The most miniaturized terminal-assembly-type pressure sensor for outside-house applicants.

Model number designation

PA-848 -102R  -R2 

Series name

PA-848:Output Current(1-5V)

Rated pressure range

102R: - 0.1 ~ 0.1 MPa
352R- 0.1 ~ 0.35 MPa
103G0 ~ 1 MPa
353G0 ~ 3.5 MPa
102A0 ~ 0.1 MPa(abs.)

Pressure reference

G: Gauge
R: Gauge (Compound)
A: Absolute

Fitting

R2: R 1/4
G2: G 1/4

 

List of model numbers

Model numbersRated pressureMaximum pressureBreak-down pressurePressure referenceFittingCAD
PA-848-102R-R2 - 0.1 ~ 0.1 MPa 0.2 MPa 0.3 MPa Gauge(Compound) R 1/4
PA-848-102R-G2 - 0.1 ~ 0.1 MPa 0.2 MPa 0.3 MPa Gauge(Compound) G 1/4
PA-848-352R-R2 - 0.1 ~ 0.35 MPa 0.7 MPa 1.05 MPa Gauge(Compound) R 1/4
PA-848-352R-G2 - 0.1 ~ 0.35 MPa 0.7 MPa 1.05 MPa Gauge(Compound) G 1/4
PA-848-103G-R2 0 ~ 1.0 MPa 2 MPa 3 MPa Gauge R 1/4
PA-848-103G-G2 0 ~ 1.0 MPa 2 MPa 3 MPa Gauge G 1/4
PA-848-353G-R2 0 ~ 3.5 MPa 4 MPa 4.5 MPa Gauge R 1/4
PA-848-353G-G2 0 ~ 3.5 MPa 4 MPa 4.5 MPa Gauge G 1/4
PA-848-102A-R2 0 ~ 0.1 MPa abs. 0.2 MPa abs. 0.3 MPa abs. Absolute R 1/4
PA-848-102A-G2 0~0.1 MPa abs. 0.2 MPa abs. 0.3 MPa abs. Absolute G 1/4

Standard specifications

Operating temp. range Ta (No freezing) : - 20 ~ 80 °C / Pressure port : - 20 ~ 100 °C
Operating humidity 35 ~ 85 %RH (No condensation)
Storage temp. - 20 ~ 80℃
Compensated temp. range 0 ~ 50℃
Pressure medium Gas and liquid which does not corrode SUS316L and Gas and liquid which does not corrode O-ring (Fluoro rubber) G2 Fitting
Pressure port R 1/4、G 1/4
Net weight Approx. 250g
Protection grade IP67
Operating voltage 21.6 ~ 26.4 VDC(including ripple)

Analog output

Pressure range102R352R103G353G102A
Output current 4 ~ 20 mA
Zero current 12 ± 0.2 mA 7.56 ± 0.2 mA 4 ± 0.2 mA 4 ± 0.2 mA 4 ± 0.2 mA
Span current 16 ± 0.4 mA
Linearity/Hysteresis  ± 0.5 % FS 
Thermal error ZERO / SPAN: ± 0.06 % FS / ℃
Load resistance 500 Ω maximum
Response Approx. 2ms
Gravitational effect
(From vertical position to horizontal position)
± 0.3 %F.S. ± 0.1 %F.S. ± 0.05 %F.S. ± 0.3 %F.S.

Environment characteristics

Test itemTest conditions (At 25 ± 5 °C)Permissible change
Vibration 10 ~ 150 Hz, 1.5 mm maximum / 98.1 m/s2 ,3 directions for 2 hours each Zero current, Span current:
± 2 %F.S. maximum each
Shock 490 m/s2, 3 directions for 3 times each
Pressure cycling 0 ~ Pr 106 cycles
Moisture resistance 40 ℃ 90 ~ 95 %RH, 240 hrs.

Important handling precautions

  • Never insert any foreign matters except specified pressure media into the pressure port, as this may alter the performance characteristics or damage the diaphragm, and cause malfunctions.
  • Tighten wiring opening with the supplied cable gland for avoiding water intrusion.
  • The cable gland and/or lid may get loose in certain usage environments and the sealing level may lower as a result. So please use a locking nut or tighten regularly.
  • Atmospheric pressure is released through wiring cable.(Nidec Components recommends a cable with built-in atmospheric-pressure-releasing tube)
  • Cable wiring should be conducted in the state of power off. Shorting the output terminal and power terminal will damage the internal circuit.Please be careful not to wire incorrectly.
●The above contents and descriptions are subject to change without notice. 

Products

×

page top